美女扒开粉嫩尿口,av永久免费网站,国产免费黄色网址

產品中心

產品詳情

所在位置: 首頁> 產品目錄> 一氧化氮與氧氣檢測系統> 常見問題>

查看大圖

產品名稱：常見問題
產品型號：常見問題
產品廠商：美國harvard
產品價格：0
折扣價格：0
產品文檔：

你添加了1件商品查看購物車

簡單介紹：

一氧化氮與氧氣檢測系統常見問題

詳情介紹：

Q1 What is the inNO-T System?

Q2 What is the function of the ‘inNO-T’ software?

Q3 How would one describe the amiNO series of nitric oxide sensors?

Q4 What do these sensors measure?

Q5 How long did it take to develop these NO sensors?

Q6 What is the basic operation principle of these sensors?

Q7 What is unique about the amiNO series of nitric oxide sensors versus other NO sensors on the market today?

Q8 How many types of nitric oxide sensors are currently available from Innovative Instruments?

Q9 What are the differences between the sensors listed above?

Q10 What are the criteria used for selecting a specific sensor?

Q11 Why is the amiNO series selective for nitric oxide over other species in a complex sample mixture?

Q12 What is the response time of the amiNO sensors?

Q13 Why are there only a small number of publications that cite the use of the existing commercially available NO electrochemical sensors for cultured cells, live organs and animals, and tissue measurements?

Q14 How are the amiNO sensors calibrated?

Q15 Can these sensors be used to measure nitrite and nitrate?

Q16 What is the life time of these amiNO sensors?

Q17 What instrument(s) can be used with the amiNO sensors?

1. What is the ‘inNO-T’ System?
'inNO-T' stands for Innovative Nitric Oxide Measuring and Recording System. Simply put, it is a "state of the art" computer controlled nitric oxide meter and data acquisition system all in one compact battery operated unit. It is the most technologically advanced nitric oxide meter on the market today with an analog to digital resolution of 24 bit (16,0000,000 to 1) allowing resolution of currents down to 0.1 pA. The ‘inNO-T’ System comes complete with Meter Analysis Software, 2 ‘amiNO’ Sensors, Magnetic Stirrer, and Calibration Kit. The software is compatible with Windows™ 95, 98, 2000 and NT.

2. What is the function of the ‘inNO-T’ software?
The ‘inNO-T’ software controls the parameters for NO measurements, display (charting), analysis and data saving and retrieval. Features include the ability to zero the background, control the recording speed, and change the scale and all the basic functions of a standard data acquisition system. On line calculations such as Minimum, Maximum, Delta, Average, Sample and Integral are also available. Data can be saved to a data file as an image and/or in text format. Data can also be fully or partially copied directly into an application such as Microsoft Excel™.

3. How would one describe the amiNO series of nitric oxide sensors?
The ‘amiNO’ series of nitric oxide (NO) sensors are currently the only electrochemical sensors on the market today that are specifically designed for real time, in-situ measurements of NO in any sample or experimental setup. This would include measurements in-vivo and in cell cultures. All sensors are integrated sensors meaning that there are no reference or counter electrodes needed. All sensors are shielded from environmental and instrumental noise.

4. What do these sensors measure?
These sensors measure free NO regardless of its source or environment.

5. How long did it take to develop these NO sensors?
The amiNO series of NO sensors came as a result of 10 years of research and development. It started in 1991 by the porphyrinic sensor (Malinski & Taha, Nature, 358, 676, 1992). The developer of amiNO sensors has developed other NO sensors still offered by other companies. The amiNO sensors are the latest generation of NO sensors.

6. What is the basic operation principle of these sensors?
The sensing element of the sensor is covered with a series of gas permeable membranes allowing only certain types of gas to pass through. NO diffuses through these membranes and reacts at the electrode surface. The exchange of electrons between NO and the electrode surface results in an electrical current that is monitored and recorded. The magnitude of the electrical current is directly proportional to the amount of NO diffused through the membranes, which is proportional to the concentration of NO in the sample.

7. What is unique about the amiNO series of nitric oxide sensors versus other NO sensors on the market today?
Competitive NO sensors on the market today represent an earlier technology in NO sensor development. The amiNO series of NO sensors represents the latest improvements in NO sensor technology increasing sensitivity (signal/unit concentration) by over 100 times compared to currently available sensors. They also have lowered detection limits to below 1 nM. Combined with the superior electronics the ‘inNO-T’ meter, this allows the system to detect minute changes in NO concentrations. In other words, these sensors are able to differentiate between 10 and 11 nM, as an example. The following is a list of some of the other unique features these sensors offer:

The amiNO-IV is the first commercially available sensor that is suitable for in-vivo measurements. It withstands insertion into tough tissues without the danger of breaking the gas permeable membrane.
The amiNO-FLAT is the first commercially available sensor designed to monitor the release of NO from a monolayer-cultured cells and large flat tissue.
Most of the sensors offer exceptional sensitivity (signal per unit concentration), enabling the users to monitor minute changes of NO concentrations. Some sensors offer a sensitivity in excess of 600 pA/nM, which is 100 times more sensitivity than any other known commercial sensor. Customized sensors can be fabricated with higher sensitivity limits.

This exceptionally high sensitivity minimizes any significant effects from baseline drift due to temperature variations. This "drift" is the primary drawback of most other commercially available sensors on the market today.

8. How many types of nitric oxide sensors are currently available from Innovative Instruments?
The table below shows a fist of eight amiNO sensors that will meet almost any NO measurement application. Five sensors are readily available. Three are available by special order. Customized sensors are also available upon request.

Amino Sensor	Description
amiNO-100	100 µm tip diameter sensor
amiNO-600	600 µm tip diameter sensor
amiNO-IV	600 µm tip diameter with a sharp mettalic tip
amiNO-FLAT	Flat design with a large surface area
amiNO-2000	2 mm stainless steel tip diameter sensor
amiNO-30	30 µm tip diameter sensor
amiNO-7	7 µm tip diameter sensor
amiNO-GAS	Gas phase sensor

9. What are the differences between the sensors listed above?
The differences include size, flexibility of the body, durability, sensitivity and response time. They are specifically designed to meet the requirements for specific applications.

10. What are the criteria used for selecting a specific sensor?
The selection of the proper NO sensor strictly depends upon the application, the expected level of NO, and budgetary requirements. The following sensitivity comparison and selection guides can be useful in choosing the right sensor for you.

11. Why is the amiNO series selective for nitric oxide over other species in a complex sample mixture?
The selectivity is assured by the intrinsic structural and instrumental design of the sensors. The use of our proprietary TRIPLECOAT gas permeable membrane design 'filters' out all other species and most gases. Instrumental parameters are set to measure only NO even in the presence of oxygen, carbon dioxide, nitrogen, carbon monoxide, and other gases.

12. What is the response time of the amiNO sensors?

The response time is defined as the time needed to reach 90% of the response. The response time of the ‘amiNO’ sensors varies from one design to another from under one second to several seconds.

13. Why are there only a small number of publications that cite the use of the existing commercially available NO electrochemical sensors for cultured cells, live organs and animals, and tissue measurements?
Due to the inherent technical limitations (e.g. low sensitivity and membrane fragility) with previously available commercial sensors, research involving cultured cells, live organs and animals, and tissues was either very difficult or impossible. The dramatic improvements in our new NO detection technologies now make the before mentioned measurements possible.

14. How are the amiNO sensors calibrated?
The sensors are calibrated by a simple, economical, and a reliable chemical reaction for NO production. This reaction is based on the conversion of nitrite to nitric oxide in acidic solution in the presence of iodide ion. The reaction has a ratio of one to one, meaning that the amount of NO produced in this reaction equal to the amount of nitrite added. Of course other methods such as SNAP and NO saturated solutions can be used.

15. Can these sensors be used to measure nitrite and nitrate?
Yes, the concentration of nitrite in a sample can be measured by injecting a certain volume of the sample into an acid/iodide solution in which nitrite is converted to NO, then detected by the sensor. To measure nitrate, it must be first converted to nitrite using our Nitrate Reductor.

16. What is the life time of these amiNO sensors?
The general life time of the ‘amiNO’ sensors varies from one sensor to another. The ainiNO-2000 is very durable and can be used for years. This sensor is supplied with extra membrane sleeves that can be changed by the user as needed. The amiNO-IV and amiNO-FLAT are constructed of very tough membranes that are not easily damaged. They can last for a year or longer. The main factor effecting the life time of all sensors depends mainly on the care used in handling and storing them.

17. What instrument(s) can be used with the amiNO sensors?
For optimum results it is recommended that the ‘amiNO’ sensors be used only with the ‘inNO-T’ Nitric Oxide Measuring System. Sensors can be compatible with other existing NO meters on the market today through the use of available adapters.

姓名：

電話：

您的需求：

京公網安備 11010702001818號

產品名稱：常見問題